Adding EZSSH Access to Endpoints With Bash Script

Prerequisites

1. Have at least one policy with endpoints

Overview

EZSSH uses SSH Certificates to authenticate to endpoints. Since this is a OpenSSH supported protocol, no custom code has to run on your endpoints for authentication to work. By adding your EZSSH Certificate to your TrustedUserCAKeys your endpoint will start working with EZSSH.

In this page we will go through how to do this with running a bash script on an existing endpoint. You might also be interested in:

1. Adding EZSSH Using Cloud Init
2. Adding EZSSH Using Pulumi

Getting the Script

1. go to https://portal.ezssh.io/
2. Select the policy type you want to access (Azure Policy or Hybrid Policy)
3. Once you are in the policy type page, expand the policy you want to set up. In this example we will expand “AWS EastUS Policy”
4. Click the “Get Script” button at the top of the policy.

   If you want to only set up the Linux principals of an access policy click the “Get Script” button of that access policy.

5. Switch to the “Bash Script” Tab
6. Click the “Download” Button
7. The Script will be downloaded to your Downloads Folder.

Understanding the Script

This Script should get you started with accessing your endpoints using EZSSH. However, it is important to understand what it does, since you might want to modify it to fit your deployment. In this Section we will go through a sample script line by line.

First we check if there has been a CA file added to the sshd_config, if we find one we remove it.

#!/bin/bash 
authkeys=$(awk '$1 ~ /^TrustedUserCAKeys/'  /etc/ssh/sshd_config)
if [ ! -z "$authkeys" ]
then
    echo "TrustedUserCAKeys found removing from file"
    awk '$1 !~ /^TrustedUserCAKeys/'  /etc/ssh/sshd_config > tmp.txt
    cat tmp.txt > /etc/ssh/sshd_config 
    rm tmp.txt
fi

Then we check if an AuthorizedPrincipalsFile was set in the sshd_config, if we find one we remove it.

authPrincipals=$(awk '$1 ~ /^AuthorizedPrincipalsFile/'  /etc/ssh/sshd_config)
if [ ! -z "$authPrincipals" ]
then
    echo "AuthorizedPrincipalsFile found removing from file"
    awk '$1 !~ /^AuthorizedPrincipalsFile/'  /etc/ssh/sshd_config > tmp.txt
    cat tmp.txt > /etc/ssh/sshd_config 
    rm tmp.txt
fi

Then we specify our own TrustedUserCAKeys file location in sshd_config

echo "Adding trusted CA file to /etc/ssh/sshd_config"
echo "TrustedUserCAKeys /etc/ssh/trusted_ca_keys.pub" >> /etc/ssh/sshd_config

Then we specify the location of our Authorized principals

echo "Adding Authorized Principals file to /etc/ssh/sshd_config"
echo "AuthorizedPrincipalsFile /etc/ssh/auth_principals/%u" >> /etc/ssh/sshd_config

Then we add the EZSSH Policy CA Public key to /etc/ssh/trusted_ca_keys.pub

echo "Adding CA Public Key"
echo "ssh-rsa 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"  > /etc/ssh/trusted_ca_keys.pub

Then we check if the directory we specified for auth principals exists, if not we create it.

if [ ! -d "/etc/ssh/auth_principals" ]; then
  mkdir /etc/ssh/auth_principals
fi

Later we set a bool to see which type of sudo does your distro use:

sudogroup=$(awk '$1 ~ /^sudo/'  /etc/group)  

Then for each user on the policy we will try to create it and if it was marked as sudo we will try to add it to the sudo group.

Check if the user exists (in this example the user is called “root”), if it doesn’t exist, create the user.

if id root &>/dev/null; 
then     
    echo 'Skipping user root since it already exists'; 
else     
    echo 'Adding user root';
    useradd root
fi

Then if the user is set as sudo in EZSSH the script will contain the following if statement to add it to the sudo group.

if [ ! -z "$sudogroup" ]
then
    usermod -aG sudo root
else
    usermod -aG wheel root
fi

Then we add the user as an authorize principal for authentication.

#Adding principal for authentication
echo 'root' > /etc/ssh/auth_principals/root

Once we have added all the users, we restart the ssh service for it to take the changes we made.

service ssh restart

Running the Script

1. SSH into the endpoint where you want to enable the policy.
2. Run the Script as sudo
3. You are ready to start using your EZSSH policy in this endpoint.